Panasonic TH-80BF1U Operating Instructions Manual page 11

●
Some wireless LAN devices may not be set for security immediately after purchase. To decrease the possibility of
occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all security-
related settings according to the instructions given in the operation manuals supplied with them.
Depending on the specifications of the wireless LAN, a malicious third-party may be able to break security settings
by special means.
Please contact Panasonic if you need help taking care of security settings or other such.
If you cannot perform security settings for your wireless LAN by yourself, please contact the Panasonic Support
Center.
●
Panasonic asks customers to thoroughly understand the risk of using this product without making security
settings, and recommends that the customer make security settings at their own discretion and responsibility.
About built-in wireless LAN
CAUTION:
Be aware of the following limits before using the Wireless LAN Module.
•
To use the Wireless LAN Module, an access point needs to be obtained.
Do not use the Wireless LAN Module to connect to any wireless network (SSID  ) for which you do not have
•
usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as
illegal access.
 SSID is a name for identifying a particular wireless network for transmission.
•
Do not subject the Wireless LAN Module to high temperatures, direct sunlight or moisture.
•
Do not bend, or subject the Wireless LAN Module to strong impacts.
•
Do not disassemble or alter the Wireless LAN Module in any way.
•
Do not attempt to install the Wireless LAN Module in any incompatible device.
•
Do not remove the Wireless LAN Module from the host product during operations.
•
Data transmitted and received over radio waves may be intercepted and monitored.
•
To avoid malfunctions caused by radio wave interface, keep the host product away from the devices such as
other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the
Wireless LAN Module.
•
When noises occur due to the static electricity, etc., the host product might stop operating for the protection of the
devices. In this case, turn the host product Off with Mains power On / Off switch, then turn it On again.
•
Depending on the area, this Wireless LAN Module may not be available.
Notes on Using Wireless Connection
Wireless connection function of the Display uses radio waves in the 2.4 GHz and 5 GHz bands.
A radio station license is not required, but be sure to read and fully understand the following items before use.
Do not use near other wireless equipment.
●
The following equipment may use radio waves in the same band as the Display. When the Display is used near
these devices, radio wave interference may make communication impossible, or the communication speed may
become slower.
•
Microwave ovens, etc.
•
Industrial, chemical and medical equipment, etc.
•
In-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc.
•
Designated low-power radio stations
If at all possible, avoid the use of cellular phones, TV sets or radios near the Display.
●
Cellular phones, TV sets, radios and similar devices use different radio bands from the Display, so there is no
effect on wireless communication or the transmission and reception of these devices. However, radio waves from
the Display may produce audio or video noise.
Wireless communication radio waves cannot penetrate steel reinforcements, metal, concrete, etc.
●
Communication is possible through walls and floors made from materials such as wood and glass (except glass
containing wire mesh), but not through walls and floors made from steel reinforcements, metal, concrete, etc.
Avoid using the Display in locations prone to static electricity.
●
If the Display is used in a location prone to static electricity, such as on a carpet, the wireless LAN or wired LAN
connection may be lost.
●
If this happens, eliminate the source of static electricity or electromagnetic noise and reconnect to the wireless
LAN or wired LAN.
Using the Display outside the country
●
It is forbidden to take the Display outside the country or region where you purchased it, so use it only in the said
country or region. Also, note that depending on countries or regions there are restrictions on the channels and
frequencies at which you can use the wireless LAN.
Precautions for use
11