Security Settings; Phone Lock; Allowed No. When Phone Is Locked; Change Security Code - Nokia 3105 User Manual

U s i n g t h e m e n u
once or Off, automatic answer will
not be available.
Select Lights to set the lights
permanently On. Select
to set the lights on for 15 seconds
after a keypress. The
available only when
selected.

Security settings

Press Menu, and select
Security settings to change the
security code, to define call
restictions and to set up the
lock.
Note: When security
features that restrict calls
are in use (Restrict outgoing
calls), calls may be possible
to certain emergency
numbers in some networks
(e.g. 112, 911 or other
official emergency numbers).

Phone lock

With Phone lock set to On, you can
prevent unauthorized use of your
phone by a lock code and only incoming
calls and calls to the unlocked phone
number (see below) are allowed.
Allowed no. when phone is
locked
To allow calls to certain numbers
when the phone is locked select
Allowed number when lock
26
Automatic
Lights option is
Handsfree is
Settings and
Phone
active.
Copyright © 2004 Nokia. All rights reserved.

Change security code

Your phone prompts you for a five-
digit security code for certain
features and commands. Access is
granted only after the correct
security code has been entered
successfully. The default security
code is 12345. It is recommended
that you change this code at once,
write it down, and store it in a safe
place away from your phone.
Press Menu, and select Settings,
Security settings and then
security code.

Call restrictions

Press Menu, and select Settings,
Security settings and then
restrictions to restrict incoming or
outgoing calls to a defined list of
numbers. Type in your security code
to get access to this menu. For
Restrict outgoing calls
incoming calls the following options
are available: Select
numbers to be restricted from a list,
Add restriction to add a number and
name to the restriction list,
change numbers or names in the
restriction list, and
numbers and names from the
restriction list.
Change
Call
and Restrict
to select
Edit to
Delete to erase