Use Of "Rototek" Or "Multireg 99; Precautions Againt Freezing, And Instructions For Storage - Interpump Group IP Operating Instructions Manual

Select low pressure on the Rototek or Mulitreg 99 (Fig. 3). Regulate the quantity of detergent
using the +/- knob (Fig. 4). At the end of a work session remove kit "A" from the chemical port
and replace cap (Fig. 5).
1
Pressure selection must be carried out with closed gun (1)
A - selection of the pressure
• High pressure (2)
• Low pressure (3)
A
1
9 - PRECAUTIONS AGAINST FREEZING AND INSTRUCTIONS FOR STORAGE
If the machine is stored where temperatures fall below the freezing level, it is advisable to suck
antifreeze (similar to that used for automobiles) into the pump before storage. In any case keep
the machine in a warm room for a couple of minutes before use.
A
CHEM
B
2
L
3
8 - USE OF ROTOTEK OR MULTIREG 99
L
L
4
H
B - selection of the jet
• straight pin jet (4)
• fan jet (5)
2
H
3
H
21
5
B
L H
L H
4
5