System Setup - Hyundai HTX 646 User Manual

2.2 Coaxial Digital Audio
Use the specified coaxial cable to connect the coaxial output of this unit to the coaxial input
of power amplifier.
2.3 Speaker Output
Use speaker cable(white+, black-) to connect the speaker output of this unit to the speaker.
Note:
The physical connection should comply with audio output setup of this unit.
For details, please refer to Audio Setup in System Setup.

System Setup

1. MENU OPERATION:
Press [SETUP] key to show the setup page. In setup mode, press [SETUP] key again to quit.
Press direction key to choose the desired item, press [ENTER] to confirm. (1) Some setup
items are related to the present modes. The items in gray can't be set up. (2) The setup is
memorized and will be kept after the power has been turned off.
2. GENERAL SETUP PAGE
2.1 TV Display
4:3 PANSCAN: When the unit connects to the normal TV set, the wide-screen image shows
on the full screen ,but some part is cut off.
4:3 LETTERBOX: When the unit connects to the normal TV set, the wide-screen image
shows and black bars appear on the top and bottom of screen.
16:9: Use this item when the unit is connected to the wide-screen TV set.
Wide-squeeze : Use this item when the unit is connected to the wide-screen TV set.
2.2 ANGLE MARK
It will show the ANGLE mark when playing DVD disc with multi-angle view if selection is ON.
EN - 38