Hitachi RAS-25CNH2 Instruction Manual page 10

HOW TO SET THE SLEEP TIMER
Press the
HITACHI
Hr.
°C
Example: Setting 3 hours
sleep time.
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
button.
The (RESERVED) sign goes out with a beep and the
NOTE
If you set the sleep timer when the off-timer or
on/off-timer has been set earlier, the sleep timer
becomes effective instead of the off- or on/off-
timer set earlier.
(SLEEP) button, and the display changes as shown below.
Mode
Sleep timer
Sleep Timer: The device will continue working for the designated
number of hours and then turn off.
Point the signal window of the remote controller toward the indoor
unit, and press the SLEEP button.
The timer information will be displayed on the remote controller.
The TIMER lamp lights with a beep from the indoor unit.
1 hour 2 hours
4 4
Sleep timer off
(TIMER) lamp turns off on the indoor unit.
– 10 –
Indication
3 hours 7 hours
4 4
1
(CANCEL)