Black & Decker CD300 User Manual page 20

ENGLISH
AFTER SALES SERVICE FOR THE BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
Black & Decker offers a nationwide after sales service
through our company operated service centres and
concessionaries on the Channel Islands and Isle of Man.
It is our aim to offer excellent service, fast repairs,
extensive parts availability and full accessory support.
The use of other than genuine Black & Decker
accessories and parts may damage or reduce the
performance of your Black & Decker product and may
also endanger the user. The terms and conditions of
the warranty may also be effected.
THE AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact the local Black & Decker service centre
manager who will be happy to help. Full details of our
unique after sales service can be obtained from any of
our Black & Decker service centres.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in
accordance with EEC legislation. It is recommended
that you take appropriate measures for the protection
of your hearing if the sound level seems
uncomfortable. This normally equates to a sound
pressure in excess of 85dB (A).
FEATURES
1. Trigger switch
2. Lock-on button
3. Dust shroud
4. Blade support roller
5. Shoe plate
6. Dust extraction
Your jigsaw includes some or all of these features.
Note: This user manual also covers catalogue numbers
with a letter suffix. Refer to your carton for details of
your product.
20
CD300 KS531 ML p01-31
2
1
3
4
FITTING THE BLADE
Manual blade change models
(only use this blade type
Disconnect your jigsaw from the power supply.
both screws one turn anti-clockwise.
All models
Note: To achieve a greater accuracy of cut, ensure
back of blade is touching blade support roller. See
'Blade suport roller' for instructions on how to change
position of blade support roller.
BLADE SUPPORT ROLLER
To provide greater support and accuracy when cutting,
your jigsaw is fitted with a blade support roller. This
support should be adjusted so that the roller touches
the back of the blade when cutting.
with a drop of oil will extend the life of the roller.
20
•
•
•
•
•
•
)
Slacken the two screws and
ensuring blade teeth are
facing forward, push blade
shank as far as possible into
the sawblade holder.
Slightly tighten screws
alternately to position the
blade, then fully tighten
screws. To release, turn
To do this, loosen the clamp
screw on the side of the
tool. Push the blade support
forward until the roller
touches the back edge of
the blade. Retighten the
screw. Lubricating the guide
roller (4) from time to time
22-09-2000, 11:43
6
5