Make Calls; Voice Calls; Options During A Call - Nokia MOBILE PHONE N86 User Manual

Make calls

Voice calls

1 In the standby mode, enter the phone number,
including the area code. To remove a number, press
C.
For international calls, press * twice for the + character
(which replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2 To make the call, press the call key.
3 To end the call (or to cancel the call attempt), press the
end key.
Pressing the end key always ends a call, even if
another application is active.
To make a call from Contacts, select
Scroll to the desired name, or enter the first letters of the
name to the search field.
To call the contact, press the call key. If you have saved
several numbers for a contact, select the desired number
from the list, and press the call key.

Options during a call

To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to Mute, select
To send an image or a video clip in a multimedia message
104
to the other participant of the call, select
Menu > Contacts.
Unmute first.
Options Send
>
MMS (in UMTS networks only). You can edit the message
and change the recipient before sending.
Press the call key to send the file to a compatible device
(network service).
To put an active voice call on hold while answering
another incoming call, select
To switch between the active and the held call, select
Options > Swap.
To send DTMF tone strings (for example, a password),
select Options Send DTMF.
>
Enter the DTMF string or search for it in Contacts.
To enter a wait character (w) or a pause character (p), press
* repeatedly.
To send the tone, select OK. You can add DTMF tones to the
phone number or DTMF fields in a contact card.
Tip: When you have only one active voice call, to put the
call on hold, press the call key. To activate the call, press
the call key again.
During an active call, to route the sound from the handset
to the loudspeaker, select
loudspeaker. If you have attached a compatible headset
with Bluetooth connectivity, to route the sound to the
headset, select Options
To switch back to the handset, select
handset.
Options > Hold.
Options Activate
>
Activate handsfree.
>
Options Activate
>