Kore-Beam Adjustment; Chain Tension And Adjustment Method - DAHON JIFO Manual

Kore I-Beam Seat Adjustment
The Kore I-beam saddle is a revo-lutionary
new saddle system that cuts down dramatically
on weight, while at the same time allowing the
maximum in saddle adjust-ability to the rider.
The saddle can be moved forward and
backward on the rail, while the tilt can be
adjusted up or down as well.
WARNING:
If you are in any way unsure of how to make
these adjustments yourself, please take your
bike to a qualified bicycle technician for
professional adjustment.
Step 1 - Loosen the Kore I-Beam seat
rail clamp with a 4mm Allen wrench.
Step 2 - Fit the saddle onto the rails.
Step 3 - Adjust the tilt of the saddle.
Chain tension and
adjustment method
All Jiffo bikes come with an automatic
chain tension devise.
Under normal conditions the rider will
not need to adjust the chain.
If you have problems with your chain
tension devise, please take your bike to a
qualified bicycle technician for professional
adjustment.
Step 4 - Adjust the fore and aft position.
Step 5 - Tighten the pre-greased bolts to
85 in/lbs or 9.5 NM.
22