Connecting Other Equipment; Connecting To The Rear Av1 Input Jacks - Sanyo CA21KF2G Instruction Manual

Connecting other Equipment

Connecting to the Rear AV1 Input Jacks

Connect the video and audio outputs of a VCR, video disc player, etc. to the input jacks of
this TV set . Tapes and discs can be played back.
MONITOR
AV1 INPUT
R
AUDIO
L
S-VIDEO
(MONO)
VIDEO
If the audio signal from a VCR is stereo, be sure to connect the right and left channels
to the respective right and left AUDIO-IN terminals.
When the stereo signal is inputted from the right and left audio input terminals, each time
the SURROUND button is pressed (or selection of On-screen Menu), surround mode is
changed as follows; " SURROUND 1", "SURROUND 2" and "SURROUND OFF".
"SURROUND 1" is normal surround mode. Selection of "SURROUND 2" obtains a
deeper surround effect.
If the external equipment is a monaural one, connect it to the left terminal of AUDIO IN.
Note: The effect of surround is not obtained although the switching of surround is
displayed in this monaural connection.
A•B (STEREO/MONO) button of the remote control transmitter does not operate
Note:
in this model.
To watch the AV1 video input picture, select AV1 position by pressing the TV/AV Selector.
22
OUT
SURROUND
Each time the TV/AV Selector is pressed, AV position is
changed as follows;
28
TV mode
PLAYBACK
To video and audio outputs
SURROUND
OFF
SURROUND
AV1
VCR for playback
1
2
AV1
AV2