Installation Guide - 3Com wl-602 Installation Manual

INTRODUCTION
About This Guide:
This Guide takes you through the basic steps necessary to install and configure your 3Com Wireless 11n
Cable/DSL Firewall Router, and establish a connection from your computers to the Internet. Throughout,
the Wireless 11n Cable/DSL Firewall Router is simply referred to as the Router.
Your Package Contains:
•
One 3Com Wireless 11n Cable/DSL Firewall Router
•
One power adapter for use with the Router
•
Four rubber feet
•
One Ethernet cable
•
One CD-ROM containing the Quick Installation Guide and the User Guide
•
This Installation Guide
•
One Support and Safety Information Sheet
•
One Warranty Flyer
System Requirements
Before starting, you must ensure the following:
•
You already have a cable or DSL broadband connection to the Internet with a suitable modem and that
this connection works properly. The modem must have an Ethernet port for connection to your Router.
•
You have a computer that has an Ethernet connection available and is already correctly configured for
communication with the Internet. Your computer must be able to connect to the Internet via the
modem, and must have a Web browser installed.
•
There are no other DHCP server devices on your local network that are responsible for allocating IP
addresses to your computers and other network-connected devices. Your Router will now perform this
function by default.
If one or more of these conditions are not met, refer to the comprehensive Router User Guide provided on
the accompanying CD-ROM for further guidance.
2