Kenwood at647 Instruction Manual page 8

Take care not to over process when
G
using the knife blade.
Use the K beater in the mixing bowl
G
to mix cakes - you'll get better results.
maximum capacities
pastry (flour weight) 400g/14oz
G
meat 500g/1lb 2oz
G
Never exceed the 'max' level marked
G
on the bowl.
to use the cutting discs
Use the slicing/grating disc to slice
G
or grate fruit, vegetables and cheese
and the julienne disc to cut
vegetables eg potatoes and fruit.
The range of discs listed below are
included in pack and can be
identified by the numbers marked on
the plate as follows:-
Disc No 1 - rasping/parmesan
disc. For parmesan cheese and
potato for German potato
dumplings.
Disc No 2 - fine grating. For
cheese, chocolate, nuts and firm fruit
or vegetables.
Disc No 3 - coarse grating. For
cheese and firm fruit or vegetables.
Disc No 4 - thin slice. For cheese
and firm fruit or vegetables.
Disc No 5 - thick slice. For cheese
and firm fruit or vegetables
Disc No 6 - julienne. Cuts potatoes
for French Fries and ingredients for
casseroles, salads and dips (eg
carrot, apple and pear.)
1 Place the mixer on the work surface
with the speed control facing the
front.
2 Lift off the medium speed outlet
cover .
3 Place the connector onto the outlet
with the triangle M facing towards
you and turn clockwise until it locks
into position.
4 Place the bowl onto the connector
with the handle at the back of the
mixer then turn clockwise to lock in
place.
5 Select the desired cutting disc and
place onto the connector drive - it
will only fit one way. The number
marked on the disc should be facing
uppermost. Handle the cutting
discs with care - they are
extremely sharp. Hold the disc
by the finger grip.
6 Fit the lid onto the bowl by placing
the feed tube behind the handle then
push down and turn clockwise to
lock in place. The lid can be fitted in
four different positions.
If you experience difficulty in
G
fitting the lid, remove the
attachment and switch on the
mixer briefly. Refit the
attachment.
7 Choose which feed tube you want to
use. The pusher contains a smaller
feed tube for processing individual
items or thin ingredients.
to use the small feed tube
First put the large pusher inside the
G
feed tube
to use the large feed tube
Use both pushers together
G
8 Put the food into the feed tube.
9 Switch on and push down evenly
with the pusher - never put your
fingers in the feed tube. For
most operations when using the
slicing, grating and julienne discs,
use speed 1 or 2. If more power is
required increase to speed 3.
important - Don't let the bowl fill
up as far as the cutting disc: empty
it regularly.
At the completion of the processing
G
operation, raising and lowering the
pusher several times may help to
reduce the amount of food left on
the cutting disc.
10 Switch off and unplug.
11 Remove the attachment from the
mixer by turning anti-clockwise and
lifting off. Dismantle the attachment.
(To remove the bowl from the
connector, hold the base of the
connector and turn the bowl anti-
clockwise and lift off
experience difficulty in removing the
connector from the bowl, refit the
bowl and connector to the mixer.
Turn the assembly anti-clockwise
until it reaches a stop, then turn the
bowl further to unlock from the
connector
5
.
. If you
.)
.