Easy Access Function; Recalling Positions From Memory - Hyundai Sonata 2016 Owner's Manual

Recalling positions from memory

1. Check that the shift lever is in P
(Park) while the engine Start/Stop
button is in the ON position.
2. Press the desired memory button
(1 or 2). The system will beep once,
and then the driver's seat position,
outside rearview mirror position
and instrument panel illumination
intensity will automatically adjust to
the stored positions.
3.
OLF044401N/OLF044402N
"Driver 1(or 2) settings is applied" will
appear on the LCD display.
NOTICE
• While recalling the "1" memory
position, pressing the SET or 1
button temporarily stops the
adjustment of the recalled memo-
ry position. Pressing the 2 button
recalls the "2" memory position.
• While recalling the "2" memory
position, pressing the SET or 2
button temporarily stops the
adjustment of the recalled memo-
ry position. Pressing the 1 button
recalls the "1" memory position.
• While recalling the stored posi-
tions, pressing one of the con-
trol buttons for the driver's seat,
outside rearview mirror
instrument panel illumination
will cause the movement of that
component to stop and move in
the direction that the control
button is pressed.

Easy Access Function

When exiting the vehicle the driver's
seat will move rearward when the
engine is turned off and the shift lever
in P (Park).
When entering the vehicle the dri-
ver's seat will move forward when
engine Start/Stop button is in the
ACC position.
You can activate or deactivate the
Easy Access Function from the User
Settings Mode on the LCD display.
For more information, refer to the
"LCD Display" section in this
chapter.
or
3
3-15