•
The memory card or internal memory may be full. Transfer images from the camera
to your computer, then format the internal memory or the memory card (see
and format an optional memory card" on page
•
The camera may be processing. Wait a few seconds for the camera to finish
processing the last image before taking another picture.
The Image Display is not working.
•
The Image Display may have timed out. Press any camera button to wake up the
camera.
•
Reset the camera (see
•
Replace or recharge the battery.
My image is blurry.
•
Use Focus Lock (see
•
R830 series: Use
"Using the shooting modes" on page
•
R840 series: Make sure
under
"Using the Picture Capture and Video Record menus" on page
•
Use a tripod to hold the camera steady, or improve lighting conditions.
•
Set the flash to
Action.
My image is too bright.
•
Turn the flash off (see
•
Move back from the subject and use zoom.
•
Adjust
Exposure Compensation (see Exposure Compensation under
the Picture Capture and Video Record menus" on page
•
Use
Exposure Bracketing (see Exposure Bracketing under
Capture and Video Record menus" on page
My image is too dark.
•
Wait for natural lighting conditions to improve, use the flash (see
on page
15) or add indirect lighting.
•
Adjust
Exposure Compensation (see Exposure Compensation under
the Picture Capture and Video Record menus" on page
•
Use
Exposure Bracketing (see Exposure Bracketing under
Capture and Video Record menus" on page
•
Use
Adaptive Lighting (see Adaptive Lighting under
and Video Record menus" on page
•
Use the
Spot setting for
Picture Capture and Video Record menus" on page
•
If the subject you are trying to capture is outside the flash range, turn off the flash.
This causes a longer exposure time, so use a tripod or hold the camera steady. For
information about flash working distance for this camera, go to
support, select your language and region, enter your camera model number in the
Search: Product field, click Product Information, then click Specifications.
"Resetting the camera" on page
"Using Focus Lock" on page
Steady Photo shooting mode (see Steady Photo under
15).
Steady Photo is turned on (see Steady Photo
Auto Flash or
Flash On and set the shooting mode to
"Setting the flash" on page
17).
AE Metering (see AE Metering under
8). Or replace the card with a new one.
39).
12).
15).
17).
17).
17).
17).
"Using the Picture Capture
17).
www.hp.com/
"Install
17).
"Using
"Using the Picture
"Setting the flash"
"Using
"Using the Picture
"Using the
41