Baxi Platinum 2 Combi 28 GA User's Operating Instructions & Important Warranty Information page 12

04. November 2008 08:50
Tuesday
1.6 bar
Easy Menu
Button
i-THINK Controller
STEP 1 - Press the MENU button.
HOLIDAY MODE
Time auxiliary
Holiday heating CH1
Temps / mode CH1
STEP 2 - Turn the Selector Button to
highlight 'Holiday heating CH1' and press
the Button to select the start period.
Holiday heating CH1
Period 1 : Start
Day / month - -.- -
STEP 4 - Turn the Selector Button to
highlight 'Period 1 : Start' and press the
Button. The Day/month starts flashing, turn
the Button to required month. Press the
Button and day starts flashing, turn the
Button to required day and press to select.
STEP 6 - The process to programme
Period 2 and 3 is the same. When STEP 3
is reached and Period 1 is flashing, turn the
Selector Button to highlight Period 2 or 3,
now continue with process.
12
© Baxi Heating UK Ltd 2011
Menu Button
Selector Button
Holiday heating CH1
STEP 3 - Press the Selector Button and
the Period 1 starts flashing. Press Button
to select Period 1.
Holiday heating CH1
Day / month
STEP 5 - Turn the Selector Button one
click clockwise to highlight 'Period 1 : End'
and press the Button. The Day/month
starts flashing, turn the Button to required
month. Press the Button and day starts
flashing, turn the Button to required day
and press to select.
Holiday heating CH1
STEP 7 - Turn the Selector Button to
highlight 'Operating level' and press the
Button. The Off or Reduced starts
flashing, turn the Button to required
mode. Press the Button to select.
5.4
1. Holiday - The house holder may choose either 'Off' or
'Reduced' between selected dates and is useful for maintaining
the temperature in a property when not occupied for known
lengthy period. When active a suitcase is shown on the display.
2. The Holiday mode is activated by using the Menu Button
scroll down to 'Holiday heating CH1', press the Selector Button.
3. Press again to set the month scroll and select – (the display
will start at 01,01) set the day scroll and select. Scroll again to
'Operating' level, scroll between - Off and Reduced - select the
mode required
5.5
Select
Period 1
1. There is a programme lock function available to stop the
i-THINK Controller being either tampered with or accidentally
altered.
2. After the programme lock has been activate, only the
temporary setpoints, off, reduced temperature or the functions
via the easy menu such as standby/operation or Hot water
temp setpoint are available for change by the user.
3. To activate the programme lock: -
a) Press the menu button to access 'Information', then scroll and
Period 1 : End
press to choose 'Operator section', scroll to the programme
23.07
lock option, press and scroll from 'Off' to 'On'. Confirm by
pressing the Selector Button.
b) Accessing programme lines is now still possible but when
attempting to alter any parameters the screen will show
'Programme locked'.
4. To remove the programme lock: -
a) To temporarily unlock the i-THINK Controller press the
menu button to access 'Information' then press and hold the
easy menu and selector button until 'Programme temporarily
unlocked' appears.
b) In this state any alterations can be made until returning to the
standard screen when the programming lock is activated again.
Operating level
Reduced
c) To remove the programme lock permanently: - whilst
temporarily unlocked, access the programme lock screen as
described above, and press and scroll from 'On' to 'Off'.
Confirm by pressing the Selector Button.
5.0 Mode Selection/Temp Adjustment
Holiday mode
Programme Lock