Advertisement
Fig. 12 • Wiring diagram for the Model D 13VL
Fit the internal wire in the groove of the handle cover.
Fit the tip of the Spring [39] in the groove of
the Carbon Brush [38] securely as shown
below.
Tip of the Spring [39]
Be careful not to catch the red and yellow
internal wires passed under the switch.
Fig. 13 • Wiring diagram for the Model D 13VL
Wiring of the reversing switch
Internal wire (blue)
(1)
(4)
Stator (black)
Groove of the
Carbon Brush [38]
Stator (white)
(3)
(2)
Internal wire (red)
Position the rotational change lever
of the switch between the protrusions
of the Brush Holder [52].
Wiring of the speed control switch
Cord (black or brown)
Stator (red) (M2)
Stator (yellow)
Noise suppressor
-9-
Cord (white or blue)
(1 )
(2 )
(C2)
(C1)
Advertisement
