Roland Audio Canvas UA-100 Manual page 53

Noise Occurs During Audio
Has a Microphone Been Left Connected?
If a microphone is connected to the UA-100, rotate the Mic 1/Guitar Input volume
or Mic 2 Input volume all the way to the left to turn down the input level.
In Some Cases, the Graphics Accelerator May Cause Noise to
Be Present in the Audio Playback.
Use the following procedure to set graphics acceleration to None.
1. In the Windows Control Panel, double-click Display to open the Display
Properties dialog box, and click the Settings tab.
fig.06-01.e
2. Click Advanced, and in the property window that appears, click the
Performance tab.
Playback.
Troubleshooting
53