Page 2
Table of Contents Table of Contents English ..................... 1 1. Before You Start ................How to Install ..................Troubleshooting ..................Version 03.14.2008...
1. Before You Start Package Contents TU2-ET100 Driver CD-ROM Quick Installation Guide System Requirements CD-ROM Drive CPU: 300MHz or above/ 800MHz or above (Windows Vista) Memory: 256 MB RAM or above/ 512 MB RAM or above (Windows Vista) Computer With An Available USB 1.1 or 2.0 Port Windows Vista (32-bit/64-bit)/XP (32-bit/64-bit)/2000/ME/98SE, Mac OS X (10.1~10.4)
2. How to Install Note: For Windows 98SE and Me driver installation, refer to the user guide on the Driver CD-ROM. Windows Vista/XP/2000 1. Insert the CD-ROM into your computer's CD-ROM Drive. 2. Click Run Install.exe (Windows Vista Only) 3. The drivers for your operating system will be automatically detected.
Page 5
Adapter to a Switch, Router or Cable/DSL Modem. Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register register your product Online at: Thank you for choosing TRENDnet English...
Refer to the User Guide included on the Driver CD-ROM for installation instructions. If you still encounter problems or have any questions regarding the TU2-ET100, please refer to the User's Guide included on the Driver CD-ROM or contact TRENDnet's Technical Support Department.
Page 7
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.