TRENDnet TU2-ET100 Quick Installation Manual page 5

5. Remove the driver CD-ROM from
your computer's CD-ROM drive.
6. Connect the Adapter to an
available USB port of your
computer.
7. Drivers will install automatically.
8. Connect a RJ-45 cable from the
Adapter to a Switch, Router or
Cable/DSL Modem.
Your installation is now complete.
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
Register Your Product
www.trendnet.com/register
Thank you for choosing TRENDnet
3
English