Table of Contents
Advertisement
Safety Instructions
This STB has been manufactured to meet Australian safety standards.
Please read the following safety instructions carefully before you handle the STB.
DEFINITION
MAIN SUPPLY
CABLE
LOCATION
CLEANING
OVERLOADING
VENTILATION
LIQUIDS
LIGHTNING
Throughout the manual, you will find the letters STB.
This stands for Set-Top Box.
Use only DC 12V 1.5A plugpack as supplied.
Use standard certified cables to prevent any malfunction of
the STB.
Keep the STB indoors and away from potential hazards, such as
houseplants, rain and direct sunlight.
1. Always disconnect the STB power cord from the wall socket
before cleaning it.
2. Use a light damp cloth(no solvents)to clean the case.
Do not overload wall outlets, extension cords or adapters.
These can cause fire or electrical shock.
1. Do not block ventilation slots of STB.
2. Do not place the STB on soft furnishings or carpets.
3. Ensure that a free airflow is maintained around the STB.
4. Do not allow the STB to be exposed to direct sunlight or a heater.
5. Do not stack other electronic equipment on top of the STB.
Keep liquids away from the STB.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
1. The Manufacture's instructions for safe guarding other
equipment connect to the STB, such as a television set,
must be followed during lightning conditions.
2. Ensure lightning protection devices for the terrestrial
antenna, and mains are installed.
Advertisement
Table of Contents
