Oster Versa Performance Manual page 8

Using the Manual Controls
The Manual Controls include:
High (High speed)
Med (Medium speed)
Low (Low speed)
Pulse
Reverse
Use these controls for personal recipes or to continue blending after a
Programmed Setting is finished.
1. Press the ON/OFF (I/O) power button to turn the product on. The power
light will blink, meaning the product is active and ready to use. The light
will stay on when the motor is running.
2. Choose a recipe from the recipe book or use one of your own.
3. Put the ingredients into the jar.
4. Secure the lid and the filler cap.
Using the High Speed Selection
1. Verify that the red light is blinking. This indicates
that the blender is turned on.
2. Turn knob to "High" and press knob to start.
3. Press the knob to cancel the operation at any time.
4. Press the ON/OFF (I/O) power button to turn the product off.
Using the Medium Speed Selection
1. Verify that the red light is blinking. This indicates
that the blender is turned on.
2. Turn knob to "Med" and press knob to start.
3. Press the knob to cancel the program at any time.
4. Press the ON/OFF (I/O) power button to turn the
product off.
Using the Low Speed Selection
1. Verify that the red light is blinking. This indicates that the blender is turned
on.
2. Turn knob to "Low" and press knob to start.
3. Press the knob to cancel the program at any time.
4. Press the ON/OFF (I/O) power button to turn the
product off.
NOTE: User may increase or decrease speed selection
without interruption while the blender is operating.
Using the Pulse
1. Verify that the red light is blinking. This indicates that the blender is turned on.
2. Press and release the "Pulse" button.
3. Release the pulse button to stop.
4. Press the ON/OFF (I/O) power button to turn the product off.
8