1. Manuals
  2. Brands
  3. Epson Manuals
  4. All in One Printer
  5. NPD4910-01
  6. Hardware setup manual

Epson NPD4910-01 Hardware Setup Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Epson
NPD4910-01 EN
Hardware Setup Guide
Unpacking
Remove all protective materials.
The illustrations in this manual are for a similar model. Although they may differ from your actual model, the
method of operation is the same.

Connecting the Product to a Phone Line

Connect a phone cable to the LINE port on the back of the product. Choose one of the following.
Connecting to PSTN (standard phone
line ) or PBX
a
Telephone wall jack or PBX port
If you have a PBX console in the room, connect the telephone cable from the console to the LINE port.
b
DSL filter
If your DSL modem is equipped with a built-in DSL filter, you do not need a separate DSL filter.
c
DSL modem
Hardware Setup Guide
Connecting to DSL
1
Connecting to ISDN

Advertisement

Table of Contents
loading

Related Manuals for Epson NPD4910-01

Summary of Contents for Epson NPD4910-01

  • Page 1: Connecting The Product To A Phone Line

    Epson NPD4910-01 EN Hardware Setup Guide Hardware Setup Guide Unpacking Remove all protective materials. The illustrations in this manual are for a similar model. Although they may differ from your actual model, the method of operation is the same. Connecting the Product to a Phone Line Connect a phone cable to the LINE port on the back of the product.

  • Page 2: Connecting A Phone Device

    Epson NPD4910-01 EN Hardware Setup Guide ISDN wall jack Terminal adapter or ISDN router Depending on the area, a phone cable may be included with the product. If so, use that cable. You may need to connect the phone cable to an adapter provided for your country or region.

  • Page 3: Selecting A Language, Country, And Time

    Epson NPD4910-01 EN Hardware Setup Guide Step. 2 Turn on the printer. If an error occurs check that no protective material has been left inside the printer. Selecting a Language, Country, and Time Go to the printer, and then follow the instructions to select your language, country/region, and time.
  • Page 4 Epson NPD4910-01 EN Hardware Setup Guide Step. 2 Gently shake all ink cartridges four or five times, and then remove the cartridges from their packaging. ❏ For the initial setup, make sure you use the ink cartridges that came with this printer.

  • Page 5: Loading Paper

    Epson NPD4910-01 EN Hardware Setup Guide Step. 4 Close the ink cartridge cover and the scanner unit slowly. Ink charging starts. Wait until the charging is finished. Loading Paper Step. 1 Pull out the paper cassette all the way out.
  • Page 6 Epson NPD4910-01 EN Hardware Setup Guide Slide the side edge guides until they are flush with the edges of the paper. Step. 3 Keep the cassette flat and slowly and carefully reinsert it all the way into the product. Slide out the output tray and raise...

  • Page 7: Selecting Paper Source Settings

    Epson NPD4910-01 EN Hardware Setup Guide Selecting Paper Source Settings Go to the printer, and then select the paper source settings. Select the paper size and paper type that you have loaded. If your printer has two cassettes, choose which cassette you want to setup, and then select the paper source settings.
  • Page 8 Epson NPD4910-01 EN Hardware Setup Guide 3. You can reduce your paper consumption and the impact on the environment by automatically printing on both sides of the page. 4. As standard, your printer has a power management function that powers down your product when not in use, which...

Table of Contents