1. Manuals
  2. Brands
  3. Epson Manuals
  4. All in One Printer
  5. NPD4937-00
  6. Hardware setup manual

Epson NPD4937-00 Hardware Setup Manual

Mfps & printers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Epson
NPD4937-00 EN
Hardware Setup Guide
Unpacking
Step. 1
Remove all protective materials.
The illustrations in this manual are for a similar model. Although they may differ from your actual model, the
method of operation is the same.
Step. 2
Remove all protective materials.
Installing the Optional Cassette Unit
For the WF-4630/5620/5690 series, an optional cassette unit is sold separately. If you do not have this unit, skip this
step.
Hardware Setup Guide
1

Advertisement

Table of Contents
loading

Related Manuals for Epson NPD4937-00

Summary of Contents for Epson NPD4937-00

  • Page 1 Epson NPD4937-00 EN Hardware Setup Guide Hardware Setup Guide Unpacking Step. 1 Remove all protective materials. The illustrations in this manual are for a similar model. Although they may differ from your actual model, the method of operation is the same.

  • Page 2: Connecting The Product To A Phone Line

    Epson NPD4937-00 EN Hardware Setup Guide Lower the product gently onto the unit so that the connector and two pins on the top of the unit fit into the terminal and the holes on the bottom of the product respectively.

  • Page 3: Connecting A Phone Device

    Epson NPD4937-00 EN Hardware Setup Guide DSL filter If your DSL modem is equipped with a built-in DSL filter, you do not need a separate DSL filter. DSL modem ISDN wall jack Terminal adapter or ISDN router Depending on the area, a phone cable may be included with the product. If so, use that cable. You may need to connect the phone cable to an adapter provided for your country or region.

  • Page 4: Selecting A Language, Country, And Time

    Epson NPD4937-00 EN Hardware Setup Guide Step. 2 Turn on the printer. If an error occurs, check that no protective material has been left inside the printer. Selecting a Language, Country, and Time Go to the printer, and then follow the instructions to select your language, country/region, and time.

  • Page 5: Installing Ink Cartridges

    Epson NPD4937-00 EN Hardware Setup Guide Installing Ink Cartridges Step. 1 Open the front cover. Step. 2 Remove all ink cartridges from their packaging. Shake the ink cartridge for 5 seconds 15 times horizontally in approximately 10 cm movements. ❏...

  • Page 6: Loading Paper

    Epson NPD4937-00 EN Hardware Setup Guide Step. 4 Close the front cover. Ink charging starts. Wait until the charging is finished. The initial ink cartridges will be partly used to charge the print head. These cartridges may print fewer pages compared to subsequent ink cartridges.
  • Page 7 Epson NPD4937-00 EN Hardware Setup Guide Step. 2 Pinch and slide the side edge guides to the sides of the paper cassette, and then slide the front edge guide to adjust to the paper size. Step. 3 Load A4 paper toward the front edge guide with the printable side face down, and check that the paper is not sticking out from the end of the cassette.

  • Page 8: Selecting Paper Source Settings

    Epson NPD4937-00 EN Hardware Setup Guide Step. 4 Keep the cassette flat and slowly and carefully reinsert it all the way into the product. Slide out the output tray and raise the stopper. Selecting Paper Source Settings Step. 1 Go to the printer. Select the paper source, and then select the paper size and paper type.

  • Page 9: Selecting Fax Settings

    Epson NPD4937-00 EN Hardware Setup Guide Selecting Fax Settings When the fax setting wizard screen is displayed on your printer’s control panel, tap start to configure the minimum settings required for using the fax features. When setup is complete, the home screen is displayed.

Table of Contents