Epson NPD4910-01 Hardware Setup Manual page 4

Epson NPD4910-01 EN
Step. 2
Gently shake all ink cartridges four or five times, and then remove the cartridges from their packaging.
❏
For the initial setup, make sure you use the ink cartridges that came with this printer.
These cartridges cannot be saved for later use. The initial ink cartridges will be partly used to charge the print
head. These cartridges may print fewer pages compared to subsequent ink cartridges.
❏
Do not touch the green chip or the small window on the side of the cartridge.
Step. 3
Remove only the yellow tape from the cartridges, and then insert each cartridge fully until it clicks into place.
Hardware Setup Guide
4