Sony SLV-D993P AZ Operating Instructions Manual page 62

To change the password
1
Select "Change Password" in step 4 on page 61.
The display for entering a new password appears.
2
Enter a new 4-digit password using the number buttons.
The display for confirming the password appears.
3
Re-enter the new password.
To turn off the Parental Control function
Set "Use Password" to "No" in step 3 on page 61.
To play a disc for which Parental Control is set
1
Insert the disc, then press H.
The display for entering your password appears.
2
Enter your 4-digit password using the number buttons.
The player starts playback.
If you forget your password
1
Turn on the DVD-VCR
2
Remove the disc and close the disc tray.
3
Hold down m and M on the front panel simultaneously for 5 seconds.
"Reset OK" appears on the screen.
4
Turn off the DVD-VCR.
The password is cleared.
5
To create a new password, follow step 3 on page 61.
Notes
• When you play DVD VIDEOs which do not have the Parental Control function, playback
cannot be limited on this player.
• All the ratings higher than the level you select will be blocked.
• Write your password down and keep it in a safe place in case you forget it.
• All DVD settings below which you set in the "DVD SETUP" menu will also be cleared when
you reset the DVD-VCR to clear the password setting.
– Language Setup
– Audio Setup
– Screen Setup
– Parental Setup
62
Parental Control (limiting playback by children)
.