Sony SLV-D993P AZ Operating Instructions Manual page 12

Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• Do not leave the remote commander in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so
may cause a malfunction.
Controlling TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the
following table, set the appropriate manufacturer's code number.
1
Set TV / DVD·VIDEO at the top of the remote commander to TV.
2
Hold down ?/1, and enter your TV's code number using the number buttons. Then release
?/1.
Now you can use the buttons with an orange dot (•) to control your TV.
When the TV / DVD·VIDEO switch is set to TV, the remote performs the following:
Buttons
?/1
VOL +/–
PROG +/–
Number buttons and
MUTING*
TV/VIDEO
* for Sony TV only
12
Setting up the remote commander
Operations
Turns your TV on or off
Adjusts the volume of your TV
Selects the channel on your TV
-/--
Selects the channel on a Sony TV
*
Mutes a Sony TV equipped with the muting function
Switches your TV's input source