Specifications - Sony SLV-D993P AZ Operating Instructions Manual

Specifications

System
Laser
Semiconductor laser
Signal format system
PAL/(NTSC), MESECAM
Channel coverage
SLV-D993P AZ
B/G:VHF E2 to E12/UHF E21 to E69/
CATV S01 to S05, S1 to S41
B/B: VHF R1 to R12/UHF R21 to R69
SLV-D993P ME
B/G:VHF E2 to E12/UHF E21 to E69/
CATV S01 to S05, S1 to S41
D/K: VHF R1 to R12/UHF R21 to R69
I: VHF SA4 to SA13/UHF B21 to B69/
CATV S01 to S05, S1 to S41
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL
NTSC 33.35 mm/s (recording*(line input
LP: PAL
NTSC 16.67 mm/s (playback only)
EP: NTSC 11.12 mm/s (recording*(line input
* SLV-D993P ME only
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 2 min. 30 sec. (with E180 tape)
Inputs and outputs
LINE IN 1/LINE-2 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jacks (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO OUT, phono jacks (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Additional AUDIO OUT, phono jacks (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohoms
114
Specifications
23.39 mm/s (recording/playback)
only)/playback)
11.70 mm/s (recording/playback)
only)/playback)
DIGITAL OUT (COAXIAL)
Phono jack/0.5 Vp-p/75 ohms
S-VIDEO OUT
4-pin mini DIN/Y: 1.0 Vp-p, C: 0.3 Vp-p (PAL),
0.286 Vp-p (NTSC)/75 ohms
COMPONENT VIDEO OUT (Y, Cb, Cr)
Phono jack
Y: 1.0 Vp-p/Cb, Cr: 0.7 Vp-p, 75 ohms
Timer section
Clock
Quartz locked
Timer indication
24-hour cycle
Timer setting
6 programs (max.)
Power back-up
Back-up duration:
SLV-D993P AZ: up to 6 hours at a time
SLV-D993P ME: up to 24 hours at a time
General
Power requirements
SLV-D993P AZ: 220 – 240 V AC, 50 Hz
SLV-D993P ME: 110 – 240 V AC, 50/60 Hz
Power consumption
20 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions including projecting parts and controls
(w/h/d)
Approx. 430 × 85 × 287 mm
Mass
Approx. 3.9 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change without
notice.