D-Link DWL-G730AP Quick Installation Manual page 10

Client Mode - Using the Setup Wizard
To configure the DWL-G730AP in Client Mode, you will need to connect a PC directly to
the DWL-G730AP using a standard Ethernet cable. You will need to assign the network
adapter connecting to the DWL-G730AP an IP address in the range of 192.168.0.x.
O p e n y o u r W e b
browser and type
http://192.168.0.30
into the URL address
box. Then press the
Enter or Return key.
The logon pop-up screen
will appear.
Type admin for the
username and leave the
password field blank.
Click OK
Once you have logged in, the
Home screen will appear.
Click Run Wizard
10