Ignition Key; Fuel Gauge; Hour Meter; Transmission Neutral Indicator Light - Toro LT3340 Operator's Manual

Ignition Key

0 = Engine off
I = Engine run/Auxiliary on
II = Engine pre-heat
III = Engine start
WARNING
Always remove the ignition key when the mower is
not in use.
1
Figure 20
1. Ignition switch
Engine Pre-Heat Indicator Light
Turn the ignition key to position II. The engine preheat
indicator light will illuminate and heat the glow plugs
(Figure 21).
Important: Attempting to start a cold engine before
the pre-heat is used can cause unnecessary wear to the
battery.
Figure 21
1. Engine pre-heat indicator light
I
II
III
G014556
1
G014557

Fuel Gauge

The fuel gauge shows the amount of fuel in the tank
(Figure 22).

Hour Meter

The hour meter shows the total hours that the machine has
been operated (Figure
1
1. Hour meter

Transmission Neutral Indicator Light

This light illuminates when the travel control pedal is in the
neutral position and the ignition key is turned to position I
(Figure 24).
Note: The parking brake must be engaged for the
transmission neutral indicator light to illuminate.
1. Transmission neutral indicator light
18
FUEL
E
F
G014558
Figure 22
23).
000.0
Figure 23
1
G0014560
Figure 24
G014559