D-Link DCS-6513 Quick Install Manual page 8

General Connection Using 12V DC Power Adapter
1. Connect the network camera to a switch or router via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power outlet.
General Connection Using 24V AC Power Wiring
1. Connect the network camera to a switch or router via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power source such as your building's
emergency power.
Connection with a PoE Switch
If you are using a PoE switch, connect the IP camera to the switch via an Ethernet cable, which will
provide transmission of both power and data over a single cable.
D-Link DCS-6513 Quick Install Guide
8