7.9.
Removal of the S1-Board
1. Release the cable from the clamper.
2. Unscrew the screws (×2
the bracket.
3. Remove a coupler (S34), unscrew a screw (×1
remove the S1-Board.
7.10. Removal of the SU-Board
1. Unscrew the screws (×2
2. Slide the SU-Board to the left and disconnect from the
couplers (SC41) on the SC-Board.
3. Remove the coupler (SU45).
4. Remove the flexible cables (SU1, SU2, SU3) connected to
the SU-Board from the plasma panel, and remove the SU-
Board.
) and remove the S1-Board with
) and
).
7.11. Removal of the SD-Board
1. Unscrew the screws (×2
2. Slide the SD-Board to the left and disconnect from the
couplers (SC42) on the SC-Board.
3. Remove the coupler (SD46).
4. Remove the flexible cables (SD1, SD2, SD3) connected to
the SD-Board from the plasma panel, and remove the SD-
Board.
13
TH-37PWD8BK
).