Advertisement
3.5 After setting the TIMER, there will be a one-half second delay
before the remote controller transmits the signal to the Air
Conditioner. Then , after approximately another 2 seconds, the
set temperature will re-appear on the digital display .
Change the TIMER
To change the TIMER ON/OFF time, just press the corresponding
TIMER button and reset the time.
!
NOTE
The setting time is relative time. That is the time set is based
on the delay of the current time.
Warning
1. Be sure there are no obstacles between the remote controller
and the receiver of indoor unit otherwise the air conditioner
will not work.
2. Keep the Remote Controller away from any liquids.
3. Protect the remote controller from the high temperatures and
exposure to radiation.
4. Keep the indoor receiver out of direct sunlight or the Air
Conditioner may malfunction.
5. Keep Remote Controller away from EMI(Electro-Magnetic
Interference) supplied by other household appliances.
6. When replacing batteries, do not use old batteries or a different
type battery. This may cause the remote control to malfunction.
7. If you do not use the remote controller for several weeks
remove the batteries. Otherwise battery leakage may damage
the remote controller.
8. The average battery life under normal use is about 6 months.
9. Replace the batteries when there is no answering beep from
the indoor unit or if the Transmission Indicator light fails to light.
7
CONTENTS
Remote Controller Specifications--------------------------------------
Introduction of Function Buttons
on the Remote Controller...........................................................
Names and Functions of
indicators on Remote Controller...............................................
Operating the Remote Controller---------------------------------------
Warning.........................................................................................
1
1
3
4
7
Advertisement
