NEC FS-59V81S Instruction Manual page 16

Channels order changing
CH
Select the programme to move using remote
VOL VOL
control CURSOR UP/ DOWN buttons.
Press the remote control PICTURE/OK button :
CH
the programme appears on red and can be
moved to another place using remote control
CURSOR UP/ DOWN buttons.
PICTURE/OK
When required position is reached, confirm this
new position pressing the remote control
PICTURE/OK button. Then, the programme
appears again on green.
Station name entering - copying a programme
to another programme number
Use Install menu "NAME" and " STORE TO"
functions as explained in manual channel tuning
paragraph.
MANUAL CHANNEL SETTINGS
Choose starting point
Select with "PROGRAM" function the programme
from which you want to start manual tuning.Then,
the channel number, the frequency, the name and
the programme number of this programme are
displayed in the install menu.
Channel searching
CH
Select "FREQ." function.
VOL VOL
Press the remote control CURSOR RIGHT / LEFT
buttons for more than 3 seconds to start (up / down)
CH
manual tuning.
CH
After searching, tuning will stop automatically to the
MENU
VOL VOL
next channel. (To stop searching press the remote
control MENU button)
CH
Note: If you know channel number or frequency of
channels you want to search, you can tune
directly to these channels, entering these
data directly into "CHANNEL" or "FREQ."
function.
14