Table of Contents
Advertisement
Creating RAID Volume
1.
Press 2 on the main menu and then press Ctrl + C keys. Then following screen
appears.
2.
Use the space key to choose a RAID mode (RAID 0/ 1/ 10/ 5) and use the arrow key
to move to the Drives Assignments window.
Stripe Block Size, the default 64KB is best for RAID 0 or 10.
ƒ
Gigabyte Boundary, allows use of slightly smaller replacement drives.
ƒ
3.
On the Drives Assignments window, use the arrow keys to choose the hard drives
which you want to make part of RAID volume, and use the space key to change the
Assignment to Y. Then press Ctrl + Y keys to save the configuration.
4.
A message will show, press Ctrl + Y to manually input a name as a RAID volume
name or press any key to save default name.
5.
Another message will show, press Ctrl + Y keys if you are sure to erase the MBR
data of the disk. Or press any key to ignore this option.
6.
The message will show up on the bottom, press any key to use maximum capacity
or press Ctrl + Y keys to modify array capacity manually.
59
RAID Configuration
Hide quick links:
Advertisement
Table of Contents
