Post Flight; Automatic Shutdown Override Functions; Troubleshooting - Omega 33746 Instruction Manual

Table of Contents

Advertisement

POST FLIGHT

After you are done flying the Drone make sure the battery pack on the drone is disconnected and the
transmitter power is turned off. If you are not going to use the drone for a long period of time, please
remove the AA batteries to prevent the batteries from draining or leaking.

AUTOMATIC SHUTDOWN OVERRIDE FUNCTIONS

For safety precautions, the drone will automatically shut down when the following situations occur:
1. When the drone's battery is running low.
2. When one or more of the drone's propellers gets into a collision impact or any form of entanglement.
TR OUBL ESHOOT I NG
PROBLEM
Drone is unresponsive. The
Transmitter light keeps flashing.
Drone is unresponsive.
Transmitter light is ON. Drone is
unresponsive.
Drone's rotors spins
but doesn't take off.
Drone is shaking when flying.
Drone moves while hovering
without transmitter input.
Drone still moves forward after
adjusting the trim.
Website: www.worldtechtoys.com
Email:
customerserv@worldtechtoys.com
Phone:
(877) 498-8697
Monday - Friday / 9:00AM - 5:00PM / Pacific Time
WWW.WORLDTECHTOYS.COM
CAUSE
Transmitter is not syncing with
drone.
Transmitter and or drone
is not powered ON.
Transmitter batteries are
installed incorrectly.
Transmitter batteries are drained.
Drone's battery pack
is drained.
Rotor blades are damaged.
Drone's battery pack is drained.
Drone is not on a
flat surface.
Rotor blades are damaged.
Trim needs to be adjusted.
Gyroscope midpoint is off.
SOLUTION
Repeat the power up process.
Turn both transmitter and drone ON.
Install the batteries with the
correct polarity.
Install fresh batteries to the transmitter.
Charge the drone's battery pack.
Replace the damaged rotor blades.
Charge the drone's battery pack.
Place the drone on a flat surface
before attempting to take off.
Replace the damaged rotor blades.
Adjust the trim.
Turn off both transmitter and drone.
Go through power on process and make
sure you place the drone on a flat
surface before taking off.
SPECIFICATIONS,
COLORS AND CONTENT
MAY VARY FROM ILLUSTRATIONS
MADE IN CHINA

Advertisement

Table of Contents
loading

Table of Contents