Typical Mxo2 Le Digital Video Connections - Matrox MXO2 Quick Installation Manual

14

Typical MXO2 LE digital video connections

In the following illustration, we've connected a video monitor to view the signal that
will be recorded, and separate source and record decks. You may, however, use the
same deck as both your source and record device by making the input and output
connections to a single deck. We're using SDI connectors for video and audio, an SDI
connector for video monitoring, and we're monitoring the audio on a surround sound
speaker system through an HDMI connector. The video is genlocked using a tri-level
sync generator.
Tri-level
sync
generator
Typical MXO2 LE digital video connections
Video monitor
MXO2 LE Inputs
MXO2 LE Outputs
Recorder (Deck 2)
Source
(Deck 1)
Surround sound
speaker system