Matrox Mxo2 Rack; Matrox Mxo2 Mini - Matrox MXO2 Quick Installation Manual

Hide thumbs Also See for MXO2:

Table of Contents

Matrox MXO2 Rack

You can power MXO2 Rack using an AC outlet and an IEC-C13 power cord.

¡ Important When MXO2 Rack is connected to a computer that is running, do not

disconnect MXO2 Rack from its power source. Shut down your computer before

removing power from MXO2 Rack.

MXO2 Rack

You can power MXO2 Mini using an AC outlet via the Matrox external power supply

cable. MXO2 Mini provides an external power supply cable with international

adapter plugs for use in different regions:

• To remove an adapter plug from the Matrox power adapter, hold down the button

labeled PUSH on the power adapter, and then slide the adapter plug up until it

releases from the power adapter.

• To insert an adapter plug into the Matrox power adapter, ensure that the adapter

plug is properly aligned with the corresponding slot on the power adapter, and

then slide the adapter plug down into the power adapter until it locks into place.

IEC-C13

power cord

To AC

outlet

Powering Matrox MXO2

Table of Contents

Mxo2