Using Multi-Handset Features; Expanding Your Phone; Using Conference Calling - Uniden XDECT 8015WP series Owner's Manual

The expandable base works together with the accessory handsets to
give you some useful multi-handset features. You must have at least
two handsets to use the features in this section.

Expanding Your Phone

Your base supports a total of 6 cordless handsets: the one that

came with the base and up to 5 XDECT 8005 accessory handsets.
Your base also supports a total of 2 repeaters, including any that

came with your phone. Visit the XDECT 8055 page on the website
for compatible repeaters.
Your base might be compatible with other Uniden accessory

handsets: please visit our website for a list of compatible handsets.
Accessory handsets must be registered to the base before you

can use them. Handsets that aren't registered display a Handset
not registered message. For instructions on registering handsets to
this base, see page 27 or refer to your accessory handset manual.
Any accessory handsets that came packaged with the base are
already registered to that base for you.
If a handset was previously registered to a base, you have to reset

it so you can register it to a new base (see page 27).

using Conference Calling

When an outside call comes in, two handsets can join in a conference
call with the outside caller. To join the call, just press TalK /FlaSh . To
leave the conference call, hang up normally; the other handset
remains connected to the call. (You can also use the handset
speakerphone for a conference call, just like you can with a normal
call.)

using Multi-handset Features

Handset
#2
Handset
#1
Outside call
FIND FIND
Base
21