Using Your Phone; Changing The Volume - Uniden XDECT 8015WP series Owner's Manual

To...
make a call: Dial
the number, then
answer a call
hang up
switch between
the speaker &
earpiece
mute the micro-
phone during a call
put a call on hold
return to a call on
hold
mute the ringer for
this call only

Changing the volume

You can set the ringer, earpiece, and speaker volume separately for
each handset. For each item, press UP to make it louder or DOWN to
make it softer. The available volume levels and how change them are
listed below:
Change the When
ringer
the phone is in standby
volume
earpiece
you are on a normal call
volume
speaker you use the speaker-phone for
volume a call.

using Your Phone

From a handset
Press Talk/flaSh .
Press Talk /flaSh .
Press END or put the handset in the cradle.
Press SPEakEr .
Press MUTE .
Press again to turn the microphone back on.
Press iNTCOM/ClEar .
If the call is on hold for 5 minutes, it will be
disconnected.
Press Talk /flaSh .
While the phone is ringing, press MUTE .
From a handset
speakerphone
Press SPEakEr .
Press SPEakEr .
Press SPEakEr .
Press SPEakEr .
on a handset
choose one of 4 volume levels.
Note: lowest level is ringer off
- and the ringer off icon shows
on the display.
choose one of 6 volume levels
choose one of 6 volume levels
15