Philips QT4022 Instruction Manual page 16

English
Insert the appliance plug into the appliance (Fig. 4).
2
Put the adapter in the wall socket.

the charging light flashes to indicate that the appliance is
,
charging (Fig. 5).
Note: The charging light does not change colour and does not go out when the
appliance is fully charged.
After charging, remove the adapter from the wall socket and pull the
4
appliance plug out of the appliance.
Optimising the lifetime of the rechargeable battery
When you have charged the appliance for the first time, we advise you to
use it until the battery is completely empty.
Do not recharge the appliance in between the trimming sessions.
Continue to use the appliance until the motor almost stops running during
a session. Then recharge the battery. Follow this procedure at least twice a
year.
Trimming
When you trim for the first time, be careful. Do not move the trimmer
too fast. Make smooth and gentle movements.
Trimming with beard trimming comb
Turn the Precision Zoom Lock ` adjustment ring to the
1
desired setting. (Fig. 6)
You can choose any setting between 0.5 and 10 mm. The selected setting is
indicated by the arrow above the Precsion Zoom Lock `.
Note: When you trim for the first time, start at the highest setting (10) to
familiarise yourself with the appliance.
Switch on the appliance (Fig. ).
2
To trim most effectively, move the trimmer against the hair growth

direction. Make sure the surface of the comb always stays in full
contact with the skin (Fig. 7).