Compliance With Standards - Philips QT4022 Instruction Manual

Hide thumbs Also See for QT4022:

Available languages

Do not use the appliance in the bath or in the shower.

Caution

Use, charge and store the appliance at a temperature between 5°C and

35°C.

Only use the adapter supplied.

Never immerse the appliance in water or rinse it under the tap.

If the appliance is subjected to a major change in temperature, pressure

or humidity, let the appliance acclimatise for 30 minutes before you use

it.

If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

This appliance is only intended for trimming the human beard. Do not

use it for any other purpose.

Do not use the appliance if the cutting unit or the beard trimming

comb is damaged or broken, as this may cause injury.

Compliance with standards

The appliance complies with the internationally approved IEC safety

regulations and can be safely cleaned under the tap (Fig. 2).

This Philips appliance complies with all standards regarding

electromagnetic fields (EMF). If handled properly and according to the

instructions in this user manual, the appliance is safe to use based on

scientific evidence available today.

general

The appliance is equipped with an automatic voltage selector and is

suitable for mains voltages from 100 to 240 volts.

The adapter transforms 100-240 volts to a safe low voltage of less than

24 volts.

Charging

Charge the appliance fully before you use it for the first time.

It takes approximately 10 hours to fully charge the appliance.

When the appliance is fully charged, it has a cordless operating time of up

to 60 minutes.

Note: You can use the appliance cordless as well as connected to the mains.

Make sure the appliance is switched off (Fig. ).

English