Inserting Batteries; Using The Remote Control To Operate The System; Using The Alphanumeric Keypad To Enter The Characters - Philips DVDR616 User Manual

Remote Control

Inserting Batteries

3
1
2
1
Open the battery compartment.
2
Insert two batteries type R06 or AA,
following the indications (+-) inside the
compartment.
3
Close the cover.
Caution!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed of properly.
20
1DVDR6xx_Eng00_13453final2
(cont'd)
Using the remote control to
operate the system
1
Aim the remote
control directly at the
remote sensor (iR)
on the front panel.
2
Select the source you
wish to control by
pressing one of the
source select buttons
on the remote
control (for example
TV-MODE, TUNER).
3
Then select the
desired function (for
example S, T).
Using the alphanumeric keypad to
enter the characters
– Press a number button as often as the
required character or the number
appears.
– To enter language-dependent characters,
press ∞ or § on the corresponding
character.
– To enter a space, press button {1}.
20
3139 246 13453
7/8/04, 5:38 PM