Hex Bushing - Power Wheels xtreme machine 74790 Owner's Manual

16
Rear Axle
Hubcap
.437
Cap
Nut
• Position a .437 cap nut on a flat surface and fit one end
of the rear axle into it.
• Tap the other end of the rear axle with a hammer to
secure the cap nut on the end of the axle.
• Slide a hubcap (ribbed side up) onto the rear axle.
• Slide a hex bushing (ring side first) onto the rear axle.
Please Note: The rear wheels are larger than the front
wheels.
• Slide a rear wheel (inside surface up) onto the rear axle.
• Set the rear axle assembly aside.
17
Driver
Helpful Hint: You may want the help of another adult to
complete rear axle assembly steps 17 - 20.
• Fit a driver onto the motor on each side of the vehicle
body. Align the ribs on the inside of the drivers with the
gearbox teeth on the motors.
Rear
(Large)
Wheel

Hex Bushing

Hex Bushing
Ring Side
Inside of Wheel
Driver
Rear
Ribs
Driver
Motor
Teeth
Assembly
18
• Slide the rear axle into the hole in the center of a driver,
through the guides on the inside of the vehicle body and
out through the motor and driver on the other side of the
vehicle body.
• Rotate the rear wheel to make sure the ribs on the wheel
fit into the notches in the driver.
19
Rear
(Large)
Wheel
Hex
Bushing
.437 Cap Nut
• Slide a rear wheel onto the rear axle. Make sure that the
ribs on the wheel fit into the notches in the driver.
• Slide a hex bushing (barrel side first) onto the rear axle
and into the center of the wheel.
• Slide a hubcap onto the rear axle.
• Fit a .437 cap nut on the end of the rear axle.
• Support the cap nut on the opposite rear wheel and tap
the cap nut with a hammer.
• Pull on the wheel to make sure the cap nut is secure on
the axle.
• Set the vehicle body aside.
15
Rear
Axle
Rear
Axle
Hubcap
Rear
(Large)
Wheel
Rib
Driver
Driver