Broadcasting; Auto Program - Samsung RH48E User Manual

Chapter 08

Broadcasting

Broadcasting
Configure the settings for the product.
Available in TV mode only.

Auto Program

MENU m → Broadcasting → Auto Program
Broadcasting
Auto Program
Antenna
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favorites
- The displayed image may differ depending on the model.
- Available in TV mode only.
The
them to the
To start
→ ENTER E
Auto Program
1
2
Air
3
― Channel memorization can take up to 45 minutes, depending on your cable system.
― Memorized channels are added to the
buttons on your remote.
Cancelling Auto Program
1
2
3
Auto Program function memorises all channels that are available over the air or through your cable system and adds
Channel List.
Auto Program, follow these steps:
Push MENU m → →
Broadcasting Auto Program
Auto Program
On the screen, select the source of your product signal.
― Air: If your product is connected to an antenna choose Air, and then press ENTER E. The product will automatically
start memorizing channels.
― Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3.
On the cable type screen, use the / buttons to select the type of digital and analog cable systems you have: STD,
HRC, or IRC. Most systems are STD (Standard). When done, select Next, and then press ENTER E. The product will start
memorizing channels.
Added Ch.
Press the Stop button.
A Stop Auto Program? message appears.
Press the Yes button.
→ ENTER E on your remote. The
Auto Program
list. These are the channels you will see when you use the channel
screen appears.
81