PILOTAGE Stinger 3D 250 User Manual page 16

Table of Contents

Advertisement

Available languages

Available languages

This charger is suitable for novices and expert modelers alike. Please keep in mind that this product is not a toy. It is a battery
charger, designed for use exclusively with Li-Pol batteries and draws current form AC mains.
We hope that this product will serve you for years to come. Due to the sophisticated technical nature of this charger, it is
important that you carefully review all the below warnings, precautions, warranty terms and operational instructions thoroughly
to ensure safe use. Please retain the box and this manual for future reference.
Due to the fact that Pilotage is constantly improving the quality and functional characteristics of its products, some details,
colors, and functions may differ slightly from the images presented on the box and in the instructions
Precautionary Measures
ATTENTION! Please review throughly. Not fully compluing with these precautions may result in a fire hazard!!!!
Do not use the charger inside of a vehicle.
This charger is to be used only from AC mains. Do not use any other type of power source whenusing this charger.
Never leave this charger to charge batteries unattended.
This charger is designed only to be used with li-pol batteries. Never attempt to charge any other type of battery chemistry
with this charger..
This charger is designed only to charge 2S and 3S packs. Never attempt to charge different cell configurations with this
charger.
Never attempt to charge a battery pack if it appears to be damaged.
This charger is designed to only charge one pack at a time. NEVER ATTEMPT to charge 2 packs simultaneously.
If the battery cell heats up rapidly or expands, cease charging immediately and do not use the battery.
Do not charge when the ambient temperature is extremely high.
Ensure that the charging battery has been connected with the proper (+-) polarity.
Ensure that the battery has had a chance to cool prior to recharging, as cells may heat up significantly when discharged at
high current rates.
Ensure that the charger and battery pack have access to fresh air for cooling.
Never cover the charger with clothing, pillows or any other loose item while the charger is connected to a power source.
When charging batteries with this charger, do so in a dry, cool place away from flammable and combustible materials.
Never store or use the charger in direct sunlight.
Never expose this charger to any form of moisture. If the charger gets wet, cease from using it to prevent short-circuiting.
After charging a battery cell, always disconnect the battery from the charger. Never store battery cells when connected to
the charger.
Never puncture a battery casing.
Protect your batteries from jolts, bumps, or any other form of trauma.
Should the battery leak fluid onto your skin, flush well with water and consult a medical professional immediately.
After use, always disconnect the charger from the power source.
Never disassemble the charger.
Never use this charger if the case has been removed, or if the wire leads from the charger are fayed or bent.
Never dispose of batteries or the charger in a fire.
www.pilotage-rc.com
15

Advertisement

Table of Contents
loading

Related Products for PILOTAGE Stinger 3D 250

Table of Contents