Starting up the E5830 Wireless Modem without a PC
The E5830 Wireless Modem can be started by following Step 8 above, but it can also be started
without it being connected to the PC. Steps for doing so:
1. Press and Hold the Power button on the side of the E5830 Wireless Modem until it powers
on. On the main LED screen, you should see a green icon in the top left corner
This means that the device has attached successfully to a network.
2. Turn on the WiFi by clicking (not pressing and holding) the Wifi/WPS key on the side of the
device. A blue icon
E5830 Wireless Modem has its WiFi turned on.
3. To connect the E5830 Wireless Modem to the internet, press and hold the internet button
(which has an 'e' and a 'bulb' icon on it) on the side of the device. You should see the (M)
icon
at the bottom right of the LED screen blink rapidly – when it goes to a steady blue
state, your device has been connected to the internet.
4. When all 4 LEDs on the device are on, and steady, your device is now broadcasting your
mobile broadband connection over WiFi that other WiFi devices can use.
in the bottom left corner of the device lights up. This means that the
light up.