Fusing Section; List; Disassembly Procedure - Olivetti d-Copia 200D Service Manual

4. Fusing section

A. List
No. Part name Ref.
1 Thermistor
2 PPD2 sensor
3 Heater lamp
4 Pressure roller
5 Heat roller
B. Disassembly procedure
1) Remove the connectors (3 pcs.) of the rear cabinet.
2) Open the side cover, remove two screws, and remove the fus-
ing unit.
1)
3)
3) Cut the binding band, remove the screw, and remove the ther-
mistor.
2)
3)
Thermistor
Y109500-5
4) Remove the screw and remove the U-turn guide.
Pressure roller section disassembly
5) Remove the three screws, remove the fusing cover lower on
2)
6) Remove the screw and remove the PPD2 sensor.
2)
1)
Service Manual
2)
the right side, and open the heat roller section.
2)
4)
3)
6)
5)
1)
1)
6)
5)
1)
2)
PPD2 sensor
8-5