Table of Contents
Advertisement
EN 60
5.
DVDR880-890 /0X1
23
The Video signal received from the Digital board will be outputted on Modulator
channel 3. Please use command 120 for testing Video because Nuclei 120 will
generate the Colour Bar signal on the digital Board.
24
The Audio signal received from the Digital board will be outputted on Modulator
channel 4. Please use command 120 for testing Video because Nuclei 120 will
generate the Colour Bar signal on the digital Board.
Example
DD:> 712 01
71200: Video routing on the Analogue Board OK.
Test OK @
Route Audio
Nucleus Number: 713
PATH ID
DESCRIPTION
00
No Routing.
01
Input signal is from FRONT AUDIO IN and will be routed to the digital board.
02
Input signal is from REAR AUDIO IN 2 and will be routed to the digital board.
03
Input Audio Signal is routed from FRONT Cinch In to Digital Board.(This is same as
path id 01)
04
Input Signal is from Rear Cinch In1 and it will be routed to Digital Board..
05
No routing.
06
No routing.
07
No routing.
08
No Routing.
09
No routing.
10
No Routing.
11
No Routing.
12
No Routing.
13
Input Signal is from Digital Board and it will be routed to the digital board.
14
No routing.
15
Input is Audio Signal from TUNER and it will be routed to Digital Board.
16
Input signal is AUDIO from dvio board and will be routed to Digital Board.
17
No routing.
18
No routing.
19
No routing.
20
Input signal is from REAR AUDIO IN 2 and will be routed to the digital board.
21
Input signal is from REAR AUDIO IN 1 and will be routed to the digital board.
22
Input signal is from REAR AUDIO IN 1 and will be routed to the digital board.
23
The Audio signal received from the Digital board will be outputted on Modulator
channel 3. Please use command 117 for testing audio because Nuclei 117 will
generate the Audio signal on the digital Board.
24
The Audio signal received from the Digital board will be outputted on Modulator
channel 4. Please use command 117 for testing audio because Nuclei 117 will
generate the Audio signal on the digital Board.
EXAMPLE
DD:> 713 00
71300: Audio routing on the Analogue Board OK.
Test OK @
Diagnostic Software
Description
This nucleus routes the audio on the analogue board to the
destination determined by the input parameters
The paths that are available for audio routing and their
description (Europe version)
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
