Tuning In Channels - Mercedes-Benz S 450 4MATIC Operator's Manual

Control systems
COMAND satellite radio

Tuning in channels

You have the following selection options:
The channel search function
The channel presets
The manual channel number entry
The channel list
Tuning in channels using channel
search function
i
This function is not possible when only the
preview channel is activated. If you try to tune in
a channel in this instance, you will see the
screen described in the section "Satellite radio
service is not activated" ( page 110).
omp ymz
Slide or rotate when the
main area is selected.
Depending on the direction in which
the controller is being pressed or rotat-
ed, the system searches upward or
downward and stops at the next receiv-
able channel.
112
i
Which channels are found by the channel
search function depends on which channels you
have subscribed to and the program category
you have selected ( page 111).
Tuning in channels using channel
presets
Select "Audio" "Audio" "Sat Ra-
dio" "Presets".
or
Press n when the main area is select-
ed.
The preset menu appears. The dot R
in front of a preset position indicates
that this is the channel currently select-
ed and being listened to.
Select station preset and briefly
press n.
or
Enter a position number with the tele-
phone keypad using the A - 9
buttons ( page 90).
COMAND tunes in the corresponding
channel as long as it is included in your
subscription and is still available.
If the channel is not included in your sub-
scription, you will see the message de-
scribed in the section "Satellite radio
service is not activated" ( page 110).