Mercedes-Benz S 450 4MATIC Operator's Manual page 229

Control systems
COMAND navigation system (entering a destination)
Subsequent destination entries may differ,
depending on your selection:
"Address Entry" selection:
Enter a destination by address
( page 202).
"From Memory" selection:
Enter a destination from the desti-
nation memory ( page 223).
"From Last Destinations" selection:
Enter a destination from the list of
last destinations ( page 225).
"From POIs" selection:
Enter a special destination
( page 229).
Starting route calculation: After
entering a destination, select "Start"
( page 222).
228
Changing a stopover
If a stopover has already been entered, you
can change it.
Select "Navi" "Destination"
"Stopover" "Change Stopover".
Enter another destination as a stop-
over.
Deleting the stopover
If a stopover has already been entered, you
can delete it.
Select "Navi" "Destination"
"Stopover" "Delete Stopover".
COMAND deletes the stopover and cal-
culates the route to the main destina-
tion.