Preparing To Connect To A Network - Cisco CPA2501 User Manual

Preparing to Connect to a Network

The router power supply includes the following features:
•
Autoselects either 110V or 220V operation.
•
All units include a 6-foot (1.8-meter) electrical power cord. (A label near the power cord
indicates the correct voltage, frequency, current draw, and power dissipation for the
unit.)
Warning
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S.
(240 VAC, 10A international) is used on the phase conductors (all current-carrying
conductors). (To see translated versions of this warning, refer to the Regulatory Compliance
and Safety Information document that accompanied your router.)
Preparing to Connect to a Network
When setting up your router, consider distance limitations and potential electromagnetic
interference (EMI) as defined by the EIA.
Warning
extra-low voltage (SELV) circuits. BRI circuits are treated like telephone-network voltage
(TNV) circuits. Avoid connecting SELV circuits to TNV circuits. (To see translated
versions of this warning, refer to the Regulatory Compliance and Safety Information
document that accompanied your router.)
2-6 Router Installation and Configuration Guide
This product relies on the building's installation for short-circuit (overcurrent)
The Ethernet, Token Ring, serial, console, and auxiliary ports contain safety